This selects which format the VBOX Speed Sensor will use to output Serial data.
Racelogic
For Serial communication with other Racelogic products.
NMEA
For user-defined NMEA message output.
Note: If you select the NMEA message mode, the NMEA messages section will become available.
If the NMEA message format is selected, the following options become available:
The required serial baud rate can be selected from this drop-down menu, selectable from 4800 – 115200 kbit/s (115200 kbit/s by default).
The update rate of the NMEA messages can be changed using this drop-down list, selectable from 1 –100 Hz (1 Hz by default).
NMEA messages can be selected and deselected for transmission by checking and unchecking the boxes next to each message type.
Model Limitations
This menu is not presented when connected to a VBOX 25 Hz Speed Sensor (v2) unit.
Ethernet is switched off.
This mode will change the baud rate to 1 Mbit/s and default all CAN IDs.
This is the IP address of your VBOX Speed Sensor. In this setting, you can change the IP address, which is stored in the unit's memory.
A static IP that you can change and that is stored in the unit's memory.