| Number of Channels | 8 |
|---|---|
| DC Accuracy | ±2 mV (calibrated at 23°C) |
| Input range | ±50 V |
| Input impedance | >100 KΩ |
| Output voltage supply on SUB-D Connector |
|
| Supply Voltage | 12 V DC |
| Current | 650 mA |
| Operating Temperature | -20°C to +70°C |
| Storage Temperature | -30°C to +80°C |
WARNING
When using the +vbatt pin on the 25 way connector to power sensors, fit a 100 mA in line fuse or a fuse size that is appropriate to your setup. The reason behind this is to protect the sensor and to also protect the ADC03. Failure to do this could result in damage to the ADC03 and VBOX.
