The R138 Pass-By Noise test plugin for VBOX Test Suite gives you the ability to measure the Minimum and Maximum Sound Pressure level of vehicles with at least four wheels but without an operating internal combustion engine.
The R138 Pass-By Noise test has a unique Test Setup ribbon, from which you can configure the test.
Configure
Click on the Configure button to open the Settings window, where you can define the parameters of the test.
Report
Click on the Report button to create a report from the current test results.
Maths Channel
Click on the Maths Channels button to open the Maths Channels window to configure unique maths channels. You can find more information about maths channels in the Test Setup section.
Save Settings
Click on the Save Settings button to save the current test setup and add it to the Saved Settings area in the Add Test window.
The test will also be added to the list under the ADAS Test button on the Home tab for easy access.
Export
Click the Export button to display a dropdown menu with the export options. You can export the selected results or line results to a .csv or a .txt file.
Add Start Line
If you are using an RTK solution to set start line(s), click the Add Start Line button to set a start line. This will add a virtual start line to the Chart and Map areas at the current location of the cursor. Once you have added a start line, you can specify the gate width.
Start Line 1 will be a green line on the map. The line for the currently selected gate will become dark blue.
Gate Name
When adding gates, the name of the currently selected gate will be displayed in the name box.
The gates will be named according to the type of gate (if applicable) and the order they were added.
Click on the arrow to see a dropdown list of all added gates.
NOTE
Each gate must have a unique name.
Width
When you have added a gate, you can specify the gate width.
The default gate width is 20 m.
Enter the new width in the Width (m) box.
NOTE
After changing the gate width, that width is automatically used as the default for subsequent gates.
Rename
Click on the Rename button to edit the name of the currently selected gate.
Delete
Click on the Delete button to delete the currently selected gate.
Delete All
Click on the Delete All button to delete all set gates for the session.
Export
Click on the Export button to export the created gate(s) as an .spl file.
This file can be reused at a later date and with other VBOX products.
Import
Click on the Import button to import a previously saved or provided .spl file. When the file is imported, the gates will be added in the order they were saved to the file.
Add
The Add button adds a column to the Test Results area.
Click this button to open a dropdown menu where you can select a channel to display in the test results window.
Channel
When you select a column header in the Test Results area, the channel name will be displayed in the Channel box (the top box in the Data Column section).
Some columns will have required channels that cannot be changed.
If the channel can be changed, the Channel box will become a drop-down list with the available channels.
Result Condition
When you select a column header in the Test Results area, and it is an optional channel, the Condition dropdown menu becomes available.
The conditions in the list will depend on the test and the selected channel.
Examples are:
- Avg
- Max
- Min
- Delta
- At Start
- At End
Sort Ascending
The Sort Ascending button will sort the values in the currently selected column in the Test Results area in alphabetical order from A to Z.
Sort Descending
The Sort Descending button will sort the values in the currently selected column in the Test Results area in alphabetical order from Z to A.
Select All
Click on the Select All button to select every run in the Test Results area with one click.
Deselect All
Click on the Deselect All button to deselect every run in the Test Results area with one click.
Edit Data
Click on the Edit Data button to open the Session Data window and add various vehicle and test information.
When in Offline mode, the Session Data will be saved into the VBOX file. This information will be recalled every time the file is loaded into VBOX Test Suite.
When in Online mode, a newly created session will be populated with session data from the previous session.
To save time, you can import and export the session data for other sessions. When you have completed the Session Data, you can export the data to a .vbses file by clicking on the Export button in the Session Data window. The exported file will contain all the session data and can be imported into another session via the Import button in the Session Data window.
| Vehicle | Measurements* | Wheels/Tyres | Test | Conditions |
|---|---|---|---|---|
|
|
|
|
|
*Measurements
The vehicle offsets measurements are mandatory. The other data is optional and will not affect the test or the test result.
Enter the front and rear vehicle offsets from the laser light trigger (or from the GNSS antenna if you are using GPS start/finish lines).
The test will start when the front of the vehicle passes the start line, and it will end when the rear of the vehicle passes the finish line.
Help
Click on Help to automatically open an Internet browser and load the relevant section of the User Guide on the Racelogic Support Centre.
NOTE
This page will only be displayed if there is a valid internet connection. If there is no valid internet connection, a cached version of the relevant section (from the last software update) will be presented in PDF form.
If you are creating a new test, the Settings window will open when you add the new test. This is where you can define the test parameters.
If you have already added an R138 Pass-By Noise test and it is open, you can click on the Configure button to open the Settings window to define or amend the test parameters.
Use the arrow buttons on the right-hand side of each parameter section to expand and collapse the section to view or hide the available settings.
Start On
With Laser Light Barrier:
Select the channel Trigger in the dropdown menu.
If you use a trigger as the start condition, the test will ignore any other trigger activations during the duration of the test.
With RTK Solution:
Select the relevant option in the dropdown menu.
As the test can be conducted in both directions, you can set 1 or 2 Start On lines in this setting.
IMPORTANT
When using an RTK solution for the start condition, you must configure the start line(s) before you can select a Start Line in this setting.
Start Line Offset (m)
Set the distance between the reflective strip and the Start Line (AA') in the test area.
To prevent situations where the start line offset is less than the vehicle front offset to the antenna, the minimum value of the Start Line Offset (m) is 5 m.
It is recommended that the reflective strip be located 30 m after the Start Line.
Use the arrow buttons next to the value box to increase/decrease the value or type the required value directly into the box.
Microphone 1
Specify the channel with the input for Microphone 1.
Microphone 2
Specify the channel with the input for Microphone 2.
IMPORTANT
The channel for Microphone 1 must be specified.
Min SPL 10 kmh (dBA)
Specify the minimum sound level required at a speed of 10 km/h.
Min SPL 20 kmh (dBA)
Specify the minimum sound level required at a speed of 20 km/h.
Min SPL Reverse (dBA)
Specify the minimum sound level required when the vehicle is reversing.
Max SPL (dBA)
Specify the maximum sound level required.
IMPORTANT
Configure these settings when you are using a weather station.
Channel
Specify the channel that has the Air Temperature signal.
If you select a channel, VBOX Test Suite will add a pass/fail column for Temperature in the results table to ensure that the ambient air temperature is within the specified range during each test. The default range is 5°C to 45°C.
Min (°C)
Specify the minimum temperature in the acceptable temperature range for the test.
Use the arrow buttons next to the value box to increase/decrease the value or type the required value directly into the box.
Max (°C)
Specify the maximum temperature in the acceptable temperature range for the test.
Use the arrow buttons next to the value box to increase/decrease the value or type the required value directly into the box.
IMPORTANT
Configure these settings when you are using a weather station.
Channel
Specify the channel with the Wind Speed.
If you select a channel, VBOX Test Suite will add a pass/fail column for Wind Speed in the results table to ensure that the wind speed, including gusts, doesn't exceed the maximum threshold at the height of the microphone during each test run. The default maximum is 5 m/s.
Max (m/s)
Specify the required maximum wind speed for the test.
Use the arrow buttons next to the value box to increase/decrease the value or type the required value directly into the box.
The Test Results area is the area that displays all of the results from the current test. In this area, you can include/exclude results from the Chart area, display the average/max/min values and also easily identify any runs that have not met the pass criteria.
Every time you start a new test (via the START button on the dashboard), or load a new file, a new tab will be added to the Test Results area. This gives you the ability to switch between separate tests or files and compare runs from each. You can remove a session from the Test Results area by clicking on the X icon on the session tab.
NOTE
Whenever you make any changes to the test configuration, maths channels, vehicle dimensions, test units or session data, Test Suite will perform a file scan to apply the changes to the loaded files and update the Test Results, Map and Chart areas.
If you want to cancel the results scan, click the red X in the top right-hand corner of the workspace. This will keep the updated settings, but will not update the Test Results, Map and Chart areas accordingly.
You can rename a session tab by double-clicking the tab header.
Changing the name on the session tab in the software will automatically change the name of the locally saved VBOX file (.vbo or .vbb).
By pressing the Edit Data button next to the name of the session in the Test Results area or on the Test Setup tab on the ribbon, you can add vehicle and test information to the session.
- When in Offline mode, this information will be saved into the VBOX file, meaning that this information will be recalled every time the file is loaded into VBOX Test Suite.
- When in Online mode, a newly created session will be populated with session data from the previous session.
This information will be included in the test report to make it easier to see under what conditions the test was conducted.
To save time, you can import and export the session information for use in other sessions (the entire range of data is exported, not just the visible screen).
Once the session information has been completed, you can export the data to a .vbses file. This file will contain all the session information that can then be imported into the open session information field.
The Test Results area has the following default columns for R138 Pass-By Noise tests:
| Run | Indicates which run number the results relate to, with run one being the first run completed. There is also a selection box that, when ticked, includes the run in the graph and into the Average/Max/Min/Standard Deviation calculations. Once selected, a coloured square will appear to indicate which colour this run is displayed as on the graph. If you are loading a file in Offline mode, all valid runs will automatically be ticked. |
|---|---|
| Pass/Fail | Whether the run has passed or failed the test. |
| Start Speed (km/h) | The speed value at the start line AA’. |
| End Speed (km/h) | The speed value at the end line BB’. |
| Mic 1 Min (dBA) | The minimum sound level value of Microphone 1. |
| Mic 1 Max (dBA) | The maximum sound level value of Microphone 1. |
The software will automatically add columns based on any specified pass criteria.