- Set entry and exit points on your pit lane timer.
- Save the pit locations to the SD card:
Menu → Pit Lane Menu → Manage Pit Locations → Save Pit Locations to SD Card → OK.
The unit will create a pit locations txt file on the SD card (PITLOCATIONS.txt).
- Set entry and exit points on your pit lane timer.
- Save the pit locations to the SD card:
Menu → Pit Lane Menu → Manage Pit Locations → Save Pit Locations to SD Card → OK.
The unit will create a pit locations txt file on the SD card (PITLOCATIONS.txt).
- Insert a card with a pit location text file into the pit lane timer unit.
- Load the pit locations from the SD card:
Menu -> Pit Lane Menu -> Manage Pit Locations -> Load Pit Locations from SD Card -> OK button.
This will add the locations in the loaded file to the pit lane timer's internal memory and make it able to detect the pit locations as long as it has satellite lock.
- Insert a card with a pit location text file into the pit lane timer unit.
- Load the pit locations from the SD card:
Menu -> Pit Lane Menu -> Manage Pit Locations -> Load Pit Locations from SD Card -> OK button.
This will add the locations in the loaded file to the pit lane timer's internal memory and make it able to detect the pit locations as long as it has satellite lock.
- Save the pit locations to the SD card (see above).
- Remove the SD Card from the pit lane timer unit and open it on a computer.
- Find the most recently saved PITLOCATIONS.txt file on the SD card.
(The file name with the highest number is the latest revision on the card.)
- Open the text file.
- You can now edit the track names in this file manually.
- Save the file.
- Copy the new file to the SD cards for the pit lane timers you want to transfer them to.
When new pit lane locations are added from the SD card, these will not overwrite the currently stored location but add to them. Therefore, when you are making edits it is best to clear the old list from the unit memory before you load the edited list to avoid duplications.
IMPORTANT
- When you edit the names, you must make sure that the PIT prefix is not touched, you can only change the Track_XXX part of the line. (e.g. PIT TRACK_001 to PIT Silverstone)
- The name cannot have more than 16 characters.
- When loading pit locations onto the unit again, always delete existing pit locations from the unit first:
Menu → Pit Lane Menu → Manage Pit Locations → Clear All Pit Locations → OK.