This page contains the connector pinout information for the VBOX LapTimer units (RLVBLAP-S/RLVBLAP-R), including power, RS232/CAN, and GNSS antenna connections.
Use the pinout tables to identify connector functions and wiring requirements when integrating the unit with external power supplies, CAN systems, or compatible accessories.
| Pin | I/O | Function |
|---|---|---|
| 1 | I | Power+ |
| 2 | I | Ground |
| Chassis | I | Ground |
| Pin | I/O | Function |
|---|---|---|
| 1 | I | Power+ |
| 2 | I | Ground |
| Chassis | I | Ground |
| Pin | I/O | Function |
|---|---|---|
| 1 | O | RS232 Tx |
| 2 | I | RS232 Rx |
| 3 | I/O | CAN High |
| 4 | I/O | CAN Low |
| 5 | I | Power |
| Pin | I/O | Function |
|---|---|---|
| 1 | O | RS232 Tx |
| 2 | I | RS232 Rx |
| 3 | I/O | CAN High |
| 4 | I/O | CAN Low |
| 5 | I | Power |
| Pin | I/O | Function |
|---|---|---|
| 1 | I | Signal |
| Chassis | I | Ground |
| Pin | I/O | Function |
|---|---|---|
| 1 | I | Signal |
| Chassis | I | Ground |