Skip to main content
RACELOGIC Support Centre

How to Update the Firmware

This page contains step-by-step information about how to perform a firmware upgrade on a VBOX LapTimer (RLVBLAP-S) unit.

Occasionally Racelogic will release new versions of firmware (internal code) for the VBOX LapTimer, often to introduce new features.
 

Download the latest Firmware file here.
 

How to Update the Firmware
  1. Download the upgrade file from the link above and unzip it.

    (Your unit must be registered to receive the required login details for the download, Register here.)
     
  2. Place the .upgrade file on the root directory of an SD card (not in the media or any other folder).
     
  3. Load the SD card into the side panel of an unpowered unit.
     
  4. Power up the VBOX LapTimer unit while holding the Up button.
     
  5. The VBOX LapTimer will display a progress bar until the upgrade is complete.
    The unit will automatically power-cycle as part of the update process.
IMPORTANT 
If the screen is inverted, the buttons will keep their original functions during a firmware update. So instead of using the Up button, you must use the Down button.
  • Was this article helpful?