Refer to the subsections further down on the page for detailed explanations of the commands.
| Command | Function |
|---|---|
| PLAY | Play or query file. User can add FROM and FOR options to define start position as number of seconds into the file and also duration of replay in seconds. |
| REC (Record) | Record or query file. User can add FOR option to define duration of record in seconds. |
| ATTN (Attenuation) | Set output attenuation. Attenuation level in dB. |
| MUTE | Mute all channels. |
| CONF (Configuration) | Used to configure menu options and read current user configurations. |
| TYPE | Return All text from ‘About’ menu e.g. SN, and unit type. |
| MEDIA | Media storage functions. Used to swap between SD card and USB drive. List files on media and change directories. |
| HELP | Display List of commands for current Level. E.g.; Just HELP: will list all top level commands. HELP:PLAY: will list the PLAY commands. |
| MON (Monitor) | Monitor functions such as request levels, switch, raw NMEA output. |
| FIND | Beep and flash display. E.g. to identify single unit among multiple units. Backlight should Flash 500 on then 500 ms off and beep 500 ms on /500 ms off for total of 5 seconds. |
| SHUTDOWN | Powers down the LabSat 3 Wideband. |
| RESTART | Reboots LabSat 3 Wideband. |
NOTE
For all commands except LIST, inserting a ‘?’ character in place of a setting value will cause the unit to respond with the data.
Example:
PLAY:?<CR> will return <filename><CR> of the current file if it is playing, else ERR<CR>.
TIP
<CR> means carriage return which is the ASCII character 0x0D or char(13) but not the individual characters ‘<’ ‘C’ ‘R’ ‘>’.
If manually typing commands in a Telnet terminal, <CR> simply means pressing the Enter key.
| Specification | Command |
|---|---|
| Replay file from start to end | PLAY:FILE:name |
| Replay file from start point for defined duration | PLAY:FILE:name:FOR:duration |
| Replay file from a selected time to the end | PLAY:FILE:name:FROM:time |
| Replay file from a selected time for a defined duration | PLAY:FILE:name:FROM:time:FOR:duration |
| Stop replaying | PLAY:STOP |
| Query the replay status (name & current duration) | PLAY:? |
NOTE
Enter Time and Duration values in the PLAY commands as seconds.
| Specification | Command |
|---|---|
| Record with a default file name | REC |
| Record with a user defined file name | REC:FILE:name |
| Record with a default file name for a set duration | REC:FOR:duration |
| Record with a user defined file name for a set duration | REC:FILE:name:FOR:duration |
| Stop recording | REC:STOP |
| Query the record status (name & current duration) | REC:? |
NOTE
Enter Duration values in the REC commands as seconds.
| Specification | Command |
|---|---|
| Add attenuation on replay (all signals being replayed) | ATTN:value |
| Add attenuation on individual channels | ATTN:CH1:value:CH2:value:CH3:value |
| Specification | Command |
|---|---|
| Mute all satellite constellations | MUTE:Y |
| Unmute all satellite constellations | MUTE:N |
| Mute individual channels | MUTE:CH1:Y/N:CH2:Y/N:CH3:Y/N |
| Specification | Command |
|---|---|
| Enable live NMEA stream | MON:NMEA:ON |
| Disable live NMEA stream | MON:NMEA:OFF |
| Request CNO | MON:SAT |
| Request time, height, lat & long | MON:LOC |
| Specification | Command |
|---|---|
| Set the quantization, bandwidth and frequency to be used for recording | CONF:CONS:QUAN:value:BW:value:FREQ:frequency:frequency:frequency |
| Enable scenarios to be replayed continuously | CONF:PLAY:LOOP:Y |
| Disable continuous replay | CONF:PLAY:LOOP:N |
| Create a pause between each replay | CONF:PLAY:PAUSE:duration |
| Change the display contrast | CONF:SETUP:DISP:CONT:value |
| Change the display brightness | CONF:SETUP:DISP:BRIG:value |
| Enable power save mode | CONF:SETUP:PSAV:Y |
| Disable power save mode | CONF:SETUP:PSAV:N |
| Enable external clock reference | CONF:SETUP:CLKREF:EXT:Y |
| Enable the OCXO | CONF:SETUP:CLKREF:OCXO |
| Enable the TCXO | CONF:SETUP:CLKREF:TCXO |
| Enable UTC time | CONF:SETUP:TIME:UTC:Y |
| Manually set time | CONF:SETUP:TIME:MAN:yyyy:mm:dd:hh:mm:ss |
| Set the digital channels (CH1,2,3 & 4 configurable individually) | CONF:SETUP:DIGI:CH1:function |
| Disable digital channels(CH1,2,3 & 4 individually) | CONF:SETUP:DIGI:CH1:OFF |
| Enable arbitrated CAN recording | CONF:SETUP:CAN:LOGFILE:Y/N |
| Enable arbitrated CAN replay | CONF:SETUP:CAN:REPLAYFILE:Y/N |
| Set the baud rate on channel 1** | CONF:SETUP:CAN:CH1:BAUD:value |
| Set the baud rate on channel 2** | CONF:SETUP:CAN:CH2:BAUD:value |
| Enable/disable silent record | CONF:SETUP:CAN:SILENT:Y/N |
| Enable External Synchronisation | CONF:SETUP:SYNC:Y |
| Disable External Synchronisation | CONF:SETUP:SYNC:N |
| Returns the units configuration | CONF:? |
*Change individual channels by only stating the required channel in the command.
**Enter in bits or with the prefix 'K' or 'M' for kbit and Mbit.
| Specification | Command |
|---|---|
| Show all files on the media | MEDIA:LIST |
| Open a directory (cannot skip folders) | MEDIA:CHDIR:directory |
| Go back one directory | MEDIA:CHDIR:.. |
| Go back to root of the media | MEDIA:CHDIR:\ |
| Delete a file | MEDIA:DELETE:file |
The help keyword is used to display the currently available commands for each level of the tree.
For example, HELP<CR> will return the following: | Current commands are: help ? ATTN CONF FIND MEDIA MON MUTE PLAY REC TYPE |
To find out what subcommands are available under the configuration (CONF), send HELP:CONF<CR> which will return the following: | CONS PLAY SETUP ? |
Then to list SETUP options, send HELP:CONF:SETUP<CR> which would return: | DISP PSAV EXT TIME DIGI CAN |