Home > VBOX Mining > Hardware Info > VBOX Micro > VBOX Micro - User manual > 06 - VBOX Micro - Connecting an Input module

06 - VBOX Micro - Connecting an Input module

The VBOX Micro can connect to any one of the following Racelogic input modules and then include the data from each channel in the logged VBO file. The VBOX Micro will automatically log all channels from a connected Input Module providing that the module is connected before the power is switched on.


Part Numbers Descriptions Connection Cable
RLVBTC8 8 Channel Thermocouple Interface RLCAB063
RLVBADC02 8 Channel (10bit) Analogue Interface
RLVBADC03 8 Channel (16bit) Analogue Interface
RLVBFIM03 4 Channel Frequency and Pulse Counter Input Module
RLVBMIM01 Mini Input Module
RLVBYAW03 Yaw Rate Sensor + 2-Axis G Sensor RLCAB065
RLVBIMU04 Inertial Measurement Unit

Configuring the Input Modules

To configure an input module you must connect the module directly to the computer via a serial cable, the channels cannot be setup via the USB port on the VBOX Micro. The software required will be VBOX Setup - click here to check which modules support VBOX Setup. 

The module can take power from the VBOX Micro both during operation and during configuration. 

You must to post a comment.
Last modified
10:56, 13 Dec 2016


This page has no custom tags.


This page has no classifications.
Having trouble finding what you need?