Skip to main content
RACELOGIC Support Centre

03 - VPRS VBOX 3i Setup

To log the VPRS channels within the VB3i, configuration of VB3i can be performed using VBOX Setup software, which can be downloaded here.

  1. Ensure VB3i is powered.
  2. Connect VB3i to a computer via Bluetooth, an RLCAB001 cable from the SER port to the computer's serial port (usb-serial adapter may be required), or via a RLCAB066-2 cable from the USB port to one of the computer's USB ports.
  3. Open VBOX Setup and connect to VB3i by selecting the correct COM Port. VBOX Setup automatically connects to the selected device and enters the VB3i setup screen.
     


 

Note: An auto detect message may appear if the baud rate has been changed from the default value – select ‘Yes’ to allow the different baud rates to be scanned.

  1. Select the Channels menu and then the Internal CAN Input tab.
  2. Select a channel and then load the VPRS CAN Database by selecting the Load button.
 
  1. Choose the Range channel within the CAN channel properties window and then repeat for the other 3 channels.
VPRS VB3i VBOX Setup.png VPRS VB3i VBOX Setup1.png
  1. Ensure that the Log to memory card and Send over serial checkboxes are ticked.
  2. Select Write to unit to save the settings.
  3. The settings are now saved and the live channel will be viewable within VBOX Test Suite as well as logged to the memory card if present.
  • Was this article helpful?