OLED Displays used with VBOX Video HD2
When you are using your OLED Display with VBOX Video HD2, you can upgrade the firmware on your OLED Display via the VBOX Video HD2 unit.
To do this, you need to have the correct firmware loaded on your VBOX datalogger first.
You can download the latest VBOX Video HD2 Firmware file here.
How to Update the OLED Display Firmware on DSP07 and DSP06:
- Download the OLED Display Firmware upgrade file and unzip it.
(Your unit must be registered to receive the required login details for the download. You can register it here.) - Place the OLED Display upgrade file in the root directory of an SD card (not in the media or any other folder).
- Insert the SD card in the HD2 unit.
- Connect the OLED Display flying lead to the HD2.
- Press and hold the highlighted button (as per the images below) on the OLED Display while you connect the Power cable to the Video HD2 unit to apply power.
*Regardless of the Screen Orientation on your OLED Display, you must press and hold the following button to start the firmware upgrade process:
 |
 |
| Firmware update button on DSP07 | Firmware update button on DSP06 |
- Wait for the bootload screen. It will display a progress bar showing you that it is transferring and installing the new firmware file.
- When the process is complete, the OLED will switch off and on again by itself.
| Note: If you want to check which firmware version your OLED is currently running, go to MENU > ABOUT to see the OLED firmware number. |
How to Update the OLED Display Firmware on DSP04 and DSP05:
- Download the OLED Display Firmware upgrade file and unzip it.
(Your unit must be registered to receive the required login details for the download. You can register it here.) - Place the upgrade file in the root directory of an SD card (not in the media or any other folder).
- Power the HD2 unit and wait for it to boot up.
- Insert the SD card. The unit will beep twice when the media has been initialised and the OLED firmware has loaded.
- Power-cycle your VBOX Video HD2.
Now you can transfer the firmware file to the OLED Display.
- Press and hold the highlighted button (as per the images below) on the OLED Display while you connect it to the Video HD2 unit to apply power.
*Regardless of the Screen Orientation on your OLED Display, you must press and hold the following button to start the firmware upgrade process:
 |
 |
| Firmware update button on DSP05 | Firmware update button on DSP04 |
- Wait for the bootload screen. It will display a progress bar showing you that it is transferring and installing the new firmware file.
- When the process is complete, the OLED will switch off and on again by itself.
| Note: If you want to check which firmware version your OLED is currently running, go to MENU > ABOUT to see the OLED firmware number. |