Skip to main content
RACELOGIC Support Centre

02 - Remote Control Terminal Software

LabSat 3 can be remote accessed and controlled using most terminal software that supports a PORT 23 Telnet connection. Tera Term Pro is one example. Once connected, commands can be manually entered into a terminal program to remotely control LabSat 3. Commands are linked with the ‘:’ character and are executed on reception of the carriage return character.
 

Tera term Pro V4.80 can be downloaded here:

http://en.sourceforge.jp/frs/redir.php?m=jaist&f=%2Fttssh2%2F59957%2Fteraterm-4.80.exe
 

To open a connection to LabSat 3 in Tera Term, select ‘new connection’ and then enter labsatv3_xxyyzz into the Host box. Make sure that the Telnet radio button is checked. See the connection example below.
 

2 (1).png
 

Click ‘OK’ to connect and if successful, a ‘LABSATV3 >’ prompt should be shown. Type ‘help’ and press [ENTER] to show available commands along with the firmware version.
 

3 (1).png

  • Was this article helpful?