Home > LabSat GPS Simulators > LabSat > LabSat - User Manual > 18 - LabSat PIN OUTS

18 - LabSat PIN OUTS

Table of contents
No headers

 

 

g8631.png

Front View of LabSat

 

 

PWR.png

Connector 1 POWER  (Lemo 2 PIN)
PIN I/O Function Range
1 I Power+ 5.4V to 30V
2 I Ground 0V

 

 

 

DIG IO.png

Connector 2 AD 1 (Lemo 3 PIN)
PIN I/O Function Range
1 I Analogue 1 Input 0V to 5V
2 I Digital 2 Input 0V to 5V
3 I Ground  

 

 

 

DIG IO.png

Connector 3 AD 2 (Lemo 3 PIN)
PIN I/O Function Range
1 I Analogue 2 Input 0V to 5V
2 I Digital 1 Input 0V to 5V
3 I Ground  

 

 

 

DIG IO.png

Connector 4 DIG Out (Lemo 3 PIN)
PIN I/O Function Range
1 I Ground  
2 O Digital Out 1 0V to 5V (14v tolerant)
3 O Digital Out 1 0V to 5V (14v tolerant)

 

 

 

CAN.png

Connector 5 CAN Bus (Lemo 5 PIN)
PIN I/O Function Range
1 O RS232 Tx (PORT B) ±12v
2 I RS232 Rx (PORT B) ±12v
3 I/O CAN Bus High (PORT A) Reserved for future use
4 I/O CAN Bus Low (PORT A) Reserved for future use
5 O +V Power Same as Power+

 

 

 

CAN.png

Connector 6 RS232 SER (Lemo 5 PIN)
PIN I/O Function Range
1 O RS232 Tx (PORT A) ±12v
2 I RS232 Rx (PORT A) ±12v
3 I Digital Input 1 0V to 5V
4 O Digital Output 1 0V to 5V
5 O +V Power Same as Power+

 

 

 

 

ANT.png

SMA connectors: RF OUT and Antenna   SMA
PIN I/O Function Range
Center -

RF Signal / Power for active antenna

 
Chassis - Ground  
You must to post a comment.
Last modified
16:40, 3 Mar 2015

Tags

This page has no custom tags.

Classifications

This page has no classifications.
Having trouble finding what you need?