Skip to main content
RACELOGIC Support Centre

07 - HD2 HDMI Output

flag-de.png
HD2 HDMI.jpg

VBOX Video HD2 is available with an HDMI video/audio output, located on the side of the unit, which allows users to stream real-time video from the HD2 to an HDMI compatible monitor, recorder or streaming device.

VBOX Video HDMI can be used to give live coverage of motorsport events for TV or social media, provide race teams with the ability to give instant driver feedback, or act as a rear-view camera.


The system (RLVBVDHD2-H) comes with an HDMI port and locking pin to make sure the provided cable (RLCAB141) has a secure connection. VBOX Video HDMI will only run with the latest version of HD2 firmware (1.3.76 and higher) and setup software (1.4.259 and higher).


To output video via the HDMI port, the setting must be enabled within VBOX Video Setup Software or the VBOX Video App.

If you are connecting to an HDMI compatible monitor, it must be able to support an input timing of 1920 x 1080, 30 Hz to display the video stream. HDMI specification information is available here.

Note: A non HDMI unit cannot be upgraded to output HDMI.

Software Setup

The HDMI video output settings are accessible within the VBOX Video Setup Software via the Settings button at the top left of the screen.

This menu enables the VBOX Video HD2 HDMI variant (V6) to stream real time video and audio from the HD2 to an HDMI compatible monitor, recorder or streaming device.
 

VBVS General HDMI.png
 

The dropdown menu at the bottom of the screen allows you to choose to output from Camera 1 (without graphics), Camera 2 (without graphics) or Camera 1 and 2 (with graphics).
 

VBVS General HDMI2.png
 

IMPORTANT - HDMI output is only available when frame rate is selected as 30 fps within the Video Settings.
 

If Camera 1 and 2 (with graphics) is selected, there is then the option to enable or disable the audio output (enabled by default).
 

VBVS General HDMI Audio.png

 

App Setup

The HDMI video output settings are accessible within the VBOX Video App via the Settings button at the top left of the screen.

This menu enables the VBOX Video HD2 HDMI variant (V6) to stream real time video and audio from the HD2 to an HDMI compatible monitor, recorder or streaming device. Selecting enables you to choose to output from Camera 1 (without graphics), Camera 2 (without graphics) or Camera 1 and 2 (with graphics).
 

HD2 App HDMI.png