07 - VBOX Video Performance Tests - macOS

Adding performance tests

To add any of the eight available tests, navigate to the performance tests setup screen. This area can be accessed by using the ‘Channel Settings’ button in the top left menu bar, and then selecting the 'Performance tests' tab from the Settings pop-up menu.

To return to the scene designer, select 'Close' in the bottom right corner of the Settings pop-up menu.
 

 

There are eight standard performance tests which can be selected within the scene designer. To add a test, click on the 'New' button. This will add the tests one by one in the order shown below:
 

 

Pressing ‘Remove’ next to a test will remove that test from the scene.

Adding to a text element

These tests can be assigned to any text elements. To add a performance test into a scene, click the ‘Text’ icon within the scene designer as shown below.
 

 

This will add a new text element into the main view window.
 

 

Within the right-hand panel, the parameter settings can be set to ‘Performance tests’ and then the desired test chosen.
 

 

Performance Test results will show as ‘Time taken’ by default. The following format options can be selected.
 

 

Once the parameter has been set as desired, the performance test will actively display on the video overlay.

Note that all on-screen performance tests will start in a stopwatch-style counter when the start conditions are met, and will freeze holding results on screen as soon as test end conditions are achieved.

Tests will be reset and started again after a completed test has been done when the start conditions for the test are met again.

Editing performance tests

To edit a performance test, select the test from the left hand list. The settings for this test will then be shown in the main view window.
 

 

There are a number of standard tests which can be easily selected using the ‘select standard test’ drop down list.
 

 

When a new test is selected, press the 'Close' button to save the changes. This will update the name shown in the left-hand list, and will then appear for selection within the scene designer screen.