Skip to main content
RACELOGIC Support Centre

03 - VBOX Sim Pack Software

VBOX Sim Software can be found on the supplied SD card, follow the instructions below to configure the software for use with VBOX Sim Pack.

The top area of the software displays the current status of a supported game/simulator, including the name of the track the vehicle is currently on and the data rate of the telemetry being transmitted.

The full user guide for the software is available here.


VBOX LapTimer

Once you have connected the VBOX LapTimer to your computer as per instructions here, the computer should assign a specific COM port to the unit. This COM port will need to be selected from the drop-down menu, shown below. Once it has been selected, click ‘Open'.

VBOX Sim COM Port2.png

The Auto start line option is selected by default and automatically detects the start/finish location from the game. Once the VBOX Sim software has completed the start/finish detection process, the start/finish location is then transmitted to VBOX LapTimer for predictive laptiming.

VBOX Sim Auto Start Line2.png

Please note, the start finish detection process can take up to 3 laps to complete.


File Output Location

The location in which the video and data files are saved to your computer can be changed using the 'Browse' button.

VBOX Sim LogDirectory2.png


Video Capture Device

Tick 'External Device' to enable the VBOX Sim software to use an external video capture card. If there are multiple supported devices, these will appear in a drop down menu. Guidance on intsalling an external video capture card, such as the AverMedia LGP Lite can be found here.

VBOX Sim VideoCaptureDevice2.png


Video Offset

Factors such as computer performance may have an effect on the synchronisation of data and video, therefore an offset in milliseconds can be applied if required. Simply type in the required value or use the up and down arrows.

VBOX Sim VideoAlignment2.png

Test Video

Use the test video button to check that the video capture is working correctly. Pressing the 'Start' button once will record a 5 second sample video to the log directory.

VBOX Sim TestVideo2.png

  • Was this article helpful?