Skip to main content
RACELOGIC Support Centre

09 - VBOX Broadcast Upgrading firmware and software

Upgrading VBOX HD Firmware

Occasionally Racelogic will release new versions of firmware (internal code) for the VBOX HD, often to introduce new features. New firmware is loaded into the VBOX HD using an SD card.

Download the latest ‘.vidup’ file here

How do you run the update?

  • Download the upgrade file from the link above.
  • Place the .VIDUP file on the root directory of an SD card (not in the media or any other folder).
  • Power up the VBOX HD unit.
  • Load the SD card into the front panel.
  • The VBOX HD will double beep when the upgrade is complete.
  • Turn the unit off and on again to complete the upgrade.

Upgrading VBOX HD Software  

The latest VBOX HD Broadcast Setup Software can be downloaded here

You will be asked to specify where to save the installer; you should select your desktop.

Allow the installer to download.

If you open this ZIP file, and select ‘extract all files’ from the top left corner of the window, you can then save this to your desktop.

Now open this ‘unzipped’ folder, and click on the ‘setup.exe’ icon. This will then run through the installer – you will have to click ‘next’ a couple of times and agree to some terms and conditions.

  • Was this article helpful?