The Data window displays the values of the channels which have been logged at the position of the graph cursor. By default, Speed and Delta-T are displayed. Each parameter can be toggled on or off using the tick box in the Show column.
Up to 12 channels can be displayed at the same time.
Note: Selected default GPS channels are retained after the software is closed and reopened, however any additional selected CAN channels are not.
By default, the Current values of the channels are displayed, however these can be changed to Minimum, Maximum, Range, Delta or Average, using the Quick buttons within the Data window or the Data menu tab.
As an example, if the Minimum Function is chosen, the values now show the minimum values displayed in the current graph window.
Minimum function enabled
Channels which are not selected are shown as semi-transparent. The transparency can be changed within the Opacity option in the Home menu tab. Within this area it is also possible to change the size and type of Font used to display the channel values.
|Speed (km/h)||GPS Speed over ground|
|LatAcc (g)||Lateral acceleration (cornering g-force)|
|LongAcc (g)||Longitudinal acceleration (accel/braking g-force)|
|Delta-T (s)||Lap-time difference between two laps|
|Sats||Number of satellites being tracked|
|UTC time (s)||Co-ordinated Universal Time|
|Latitude||Latitude position in degrees and minutes|
|Longitude||Longitude position in degrees and minutes|
|Heading (°)||Vehicle heading in degrees|
|Vertical vel (km/h)||Vertical velocity|
|Distance (m)||Rolling distance travelled since start of lap|
|Elapsed time (s)||Elapsed time since start of lap|
Data Window Options
|Current||Current value at the cursor|
|Minimum||Lowest value on the displayed graph|
|Maximum||Highest value on the displayed graph|
|Range||Difference between the maximum and minimum on the displayed graph|
|Delta||Difference between the first point and last point on the displayed graph|
|Average||Average of all points on the graph (at current zoom level)|
By default, the Current values of the channels are displayed within the Data window, however these can be changed to Minimum, Maximum, Range, Delta or Average using the Data format options, more information on these options is available above.
Hide Unwanted Channels
You can choose to show just the displayed channels, hiding the non-selected items, by using the Selected channels only button.
Export / Print
The data view of the current position can be saved as a .csv file by selecting Export or printed using the Print button.
Most VBOXs are capable of logging additional channels; there are a number of different options available, the Mini-Input Module (8 analogue, 2 digital, 1 rpm), the Micro-input Module (4 analogue 1 rpm), or you can log vehicle parameters directly from the CAN bus (depending on Make, Model and Year).
If logged, these additional channels will then appear in the Data window automatically, and can be displayed on the graph in the same way as all of the other channels.