The Session window contains all of the laps from a single file, defined using the Start / Finish line, which was either contained in the file, or has been defined using the Start / Finish Wizard.
The Start / Finish Wizard can be opened using the Quick Access button, from the File Menu or by using CTRL+G.
You can toggle the visibility of laps (up to a maximum of six) using the Show tick boxes in the column on the left hand side.
The fastest lap of all sessions by default is picked as the reference or ‘Datum lap’, but this can be changed using the tick boxes in the Datum column. All splits, lap-times comparisons and Delta-T are made relative to the Datum lap.
Normally all sector times of the ideal lap are displayed as +/- time difference between the Ideal and Datum lap. If you would like to see the absolute sector times of the Ideal lap, select it temporarily as the Datum. You can close a session by clicking on the cross in the top right of the tab.
Change Order of Laps
In the Session Tab, the laps are listed in lap-time order with the fastest lap at the top. You can change the display order by clicking on the column headers. For example, by clicking on the Lap column they are arranged in lap order.
This is the function Sector by max. speed within the Start / Finish Wizard (CTRL+G). It creates a new sector at the start of a braking point at the end of a straight.
This setting not only gives a useable number of splits, but it also ensures that the Ideal lap is realistic, because it takes into account the slowing down and acceleration out of each major corner.
If you want to increase the number of splits, you can use the Sector by accel / decel option or manually define them by using the right mouse button.
You can also set the splits to be equally spaced around the track using the Equal Sectors option.
This option allows you to add various different pieces of vehicle and test information, this will be saved into the .vbo file, meaning that this information will be recalled every time the file is loaded into Circuit Tools.
Rename Current Session
You could use this function to rename the data ‘DriverA_Qualifying’. The VBO data file and the AVI video file are both re-named at the same time whilst retaining the link between them. Renaming the files manually is not recommended, as there is a reference to the video file name within the VBO file itself which is needed in order to function correctly.
Export Video (e.g. YouTube)
You can export single laps by using the 'Export video from current session' function which is in the Session menu tab:
The video files containing the single laps are saved into the same directory as the Session data containing that lap. Video VBOX video files will play natively in YouTube, Windows Media Player and VLC.
Export Laps as CSV
You can export .csv files of single laps by using the Export laps as CSV from current session function which is in the Session menu tab:
The .csv files containing the single laps are saved into the same directory as the Session data containing that lap. Video VBOX video files will play natively in YouTube, Windows Media Player and VLC.
There are two display modes possible, either the whole recorded file or detected laps.
Within this option you can choose to ignore short laps (selected by default) and to show unfinished laps, such as out laps and in laps.
It is possible to select or deselect the some of the columns visible within the session window. Options include the Datum lap selection, the Delta-T time in relation to the Datum lap, Vmax figures and lap split times.
There are two display options accessible within the Session Ribbon menu; Split to Split where a split time starts from the previous split, or Start to Split where each Split is measured from the Start of the lap. Splits faster than the datum lap are coloured Green, Splits slower are coloured Red.
To display just the split data split in the graph, click on the split time, to revert to the full lap, click on the lap-time.
Export / Print
The session view as it is currently displayed can be saved as a .csv file by selecting Export or printed using the Print button.