09 - OLED - Troubleshooting

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

See below for possible error messages and causes.

com_error (1).png

COMMUNICATION ERROR

No serial data being received from VVB.

Check firmware versions are both latest (VVB and OLED).

In Video VBOX Setup software, check serial application is set to OLED. Check hardware setup is correct.
Check cable for signs of damage, check PINS not pushed back inside connector.

trouble1 (1).png

You are >50 km from Start line

Over 50 km away from selected SF line. Check the correct SF line loaded into VVB.

trouble2 (1).png

NO REFERENCE LAP TRANSFER WHILE MOVING

Make sure you are stationary before attempting to load/ save a reference lap.

trouble4 (1).png

PREDICTIVE LAP TIMING FROZEN

Predictive Lap Timing does not update, or lap time is fixed on screen. Check ‘Split time display period’ in MENU is set to 5 seconds.
Also try clearing errors by using the RESET LAP TIMING DATA option.

trouble5 (1).png

VEHICLE IS NOT MOVING

Unable to Set S/F, split or Finish point as the vehicle is not moving