Skip to main content
RACELOGIC Support Centre

06 - Circuit Tools - macOS Map

Map Overview

 

The map pane shows both the circuit overlay and the line taken by the selected lap(s).

There are a series of buttons and other operations as shown below.

 

Available Track Layouts

Selecting the 'Track layout' button  will open a window where you can select from a list of potential track layouts based on the GPS position contained within the data.

Screen Shot 2018-03-23 at 13.52.42.png Screen Shot 2018-03-23 at 13.52.50.png

Alternatively, you can load a custom circuit overlay (.cir file) that you have previously created, or has been created for you. More information on this can be found here.

 

Start / Finish Line

Selecting the 'More' button  will open a window where you can move the start/finish line. This can be done by using a mouse to left click on the location of the circuit you wish to move the start/finish line to. Using Shift + Left click will move the finish line only.Selecting 'Apply' will save the changes.
 

Set Start  Finish Line.png

 

Controls

Expand the lap view.
Ensure that the whole track is visible (best-fit).
Keep the map view centred on vehicle position.
Toggle coloured sectors on the track.
Show available track layouts.
More - Other options including moving the start/finish line.
Zoom

Left-click and drag to draw a box around the target area.

To reset zoom, left-click and drag from right to left.

Pan

Magic mouse: Single-finger swipe.

Trackpad: Two-finger swipe.