Skip to main content
RACELOGIC Support Centre

06 - Circuit Tools Data Window

The Data window displays the values of the channels that have been logged at the position of the graph cursor. Speed and Delta-T are displayed by default. You can toggle each parameter on or off using the tick box in the Show column.

You can display up to 12 channels at the same time.
 

Note: Selected default GPS channels are retained after the software is closed and reopened. However, any additional selected CAN channels are not.
 

CTW Data Window.png
 

By default, the Current values of the channels are displayed. However, you can change these to MinimumMaximum, Range, Delta or Average, by using the Quick buttons in the Data window or the Data menu tab.
 

CTW Data Format.png

As an example, if you have chosen the Minimum 41.pngfunction, the values now show the minimum values displayed in the current graph window.
 

CTW Data Minimum Example.png
Minimum function enabled


Channels that are not selected are shown as semi-transparent. You can change the transparency in the Opacity option under the Home tab. You can also change the size and type of Font used to display the channel values in this same area.
 

CTW Fonts.png

 

Available Channels

Speed (km/h) GPS Speed over ground
LatAcc (g) Lateral acceleration (cornering g-force)
LongAcc (g) Longitudinal acceleration (accel/braking g-force)
Delta-T (s) Lap time difference between two laps
Sats Number of satellites being tracked
UTC time (s) Co-ordinated Universal Time
Latitude Latitude position in degrees and minutes
Longitude Longitude position in degrees and minutes
Heading (°) Vehicle heading in degrees
Height (m) Height
Vertical vel (km/h) Vertical velocity
Distance (m) Rolling distance travelled since start of lap
Elapsed time (s) Elapsed time since start of lap
 

Data Window Options

44 (1).png
 

Current Current value at the cursor
Minimum Lowest value on the displayed graph
Maximum Highest value on the displayed graph
Range Difference between the maximum and minimum on the displayed graph
Delta Difference between the first point and last point on the displayed graph
Average Average of all points on the graph (at current zoom level)

Data Menu

CTW Data Menu.png

 

Data Format

By default, the Current values of the channels are displayed in the Data window. However, you can change these to MinimumMaximum, Range, Delta or Average by using the Data format options. You can find more information on these options above.
 

CTW Data Format2.png

Hide Unwanted Channels

By default, all channels are shown in the data window. However, the ones that are not selected are shown as semi-transparent.

You can choose to show only the displayed channels and hide the non-selected items by using the Selected channels only button.
 

CTW Data Display.png

 

Export / Print

You can save the data view of the current position as a .csv file by selecting Export or print it by using the Print button.
 

CTW Export Print.png

External Inputs

Most VBOXes are capable of logging additional channels. There are a number of different options available, the Mini-Input Module (8 analogue, 2 digital, 1 rpm), the Micro-input Module (4 analogue 1 rpm), or you can log vehicle parameters directly from the CAN bus (depending on Make, Model and Year). 

If logged, these additional channels will then appear in the Data window automatically, and can be displayed on the graph in the same way as all the other channels.

46.png 47.png
  • Was this article helpful?