Skip to main content
RACELOGIC Support Centre

Hardware Configuration - Static Point (CAN Hub and NTRIP)

To connect the hardware when testing with a Static Point, using a CAN Hub and an NTRIP correction solution for AEB or FCW tests, please refer to the configuration below:


The following diagram shows the recommended hardware configuration, the items greyed out are not essential but many customers may find them beneficial. Click on the diagram to open a high resolution pdf configuration.

Connection between the VB3i and laptop/computer should be made via USB or Bluetooth to ensure optimum performance.
 

Please ensure that antennas are correctly positioned and connected.

Vehicle

Single Multiple Target Vehicles (CAN Hub, NTRIP and IMU) - Subject.png