Skip to main content
RACELOGIC Support Centre

Measuring Park Assist Vehicle Points

To measure the vehicle points within a Park Assist test, please follow the steps below:
 

Within this test, vehicle measurement points are not inputted to the VBOX via VBOX Manager, instead they are entered in to the Park Assist plugin within VBOX Test Suite software.


There is no limit to the number of vehicle measurement points that can be set within the software.

Points should be measured from the primary antenna, as shown below.


Park Assist Measure Points.png
 

IMPORTANT - If no vehicle measurement points are entered in to the software plugin, the antenna position is used for range calculations.