To connect the hardware using a CAN Hub and a Static Base Station for a Lane Departure Warning or Park Assist test, please refer to the configurations below:
The following diagrams show the recommended hardware configuration for the Lane/Bay Survey and the Vehicle. The items greyed out are not essential but many customers may find them beneficial. Click on the diagrams to open a high resolution pdf configuration.
Connection between the VB3i and laptop/computer should be made via USB or Bluetooth to ensure optimum performance.
Please ensure that all vehicle antennas are correctly positioned and connected.
Note: If you are using a CAN Hub during the Lane/Bay Survey, connect the components below as per the Vehicle configuration.
ADAS DGPS correction radio selection will depend on many factors, including range requirements and what geographical location they are being used in. Click here for more information.