To connect the hardware when using a CAN Hub, an NTRIP correction solution and IMU Integration for a Lane Departure Warning or Park Assist test, please refer to the configurations below:
The following diagrams show the recommended hardware configuration for the for the Lane/Bay Survey and the Vehicle. The items greyed out are not essential but many customers may find them beneficial. Click on the diagrams to open a high resolution pdf configuration.
Connection between the VB3i and laptop/computer should be made via USB or Bluetooth to ensure optimum performance.
Please ensure that all vehicle antennas are correctly positioned and connected.
Note: If you are using a CAN Hub during the Lane/Bay Survey, connect the components below as per the Vehicle configuration.