Skip to main content
RACELOGIC Support Centre

Hardware Configuration - Lane Departure Warning/ Park Assist (Static Base and IMU)

To connect the hardware using a Static Base Station and IMU Integration for Lane Departure Warning or Park Assist test, please refer to the configurations below:


The following diagrams show the recommended hardware configuration for the Lane/Bay Survey and the Vehicle. The items greyed out are not essential but many customers may find them beneficial. Click on the diagrams to open a high resolution pdf configuration.

Connection between the VB3i and laptop/computer should be made via USB or Bluetooth to ensure optimum performance.


Please ensure that all vehicle antennas are correctly positioned and connected.

Lane/Bay Survey

Single Multiple Target Vehicles (CAN Hub, NTRIP and IMU) - Subject.png

Vehicle

Single Multiple Target Vehicles (CAN Hub, NTRIP and IMU) - Subject.png

Radio Selection

ADAS DGPS correction radio selection will depend on many factors, including range requirements and what geographical location they are being used in. Click here for more information.

  • Was this article helpful?