FCW - Static Point, Static Base, IMU Roof, CAN Hub

Last updated
Save as PDF
Share
1. Share
2. Tweet
3. Share

This guide will take you through a step by step process of setting up VBOX 3i units for ADAS Forward Collision Warning (FCW) testing.
Expand the contents using the + button to see the list of articles contained within this guide.
The next article can be selected at the top or bottom of the screen to carry on through the guide.
The progress bar at the top of the page shows what step you are at within the guide.

For a full download of this ADAS User Guide, please click on the PDF icon

Forward Collision Warning (FCW) Testing

Forward Collision Warning (FCW) systems have been proven to actively avoid or drastically reduce the severity of accidents. They work by monitoring the road, providing the driver with sufficient warning to change direction or apply the brakes when entering a predefined threshold to the vehicle in front.

Validating the performance of these systems is therefore vital, with the National Highway Traffic Safety Administration (NHTSA) stating that systems must activate before the time to collision reaches a minimum of 2.1 seconds.

Further details on ADAS FCW Testing can be found on our website.

Parameters

ADAS Test	Forward Collision Warning (FCW)
Vehicles	1 Subject Vehicle and 1 Static Point
DGPS Correction Method	Static Base Station
IMU Integration	Roof Mounted
CAN Hub	Yes

IMPORTANT - Please ensure that all product Firmware and Software versions are up to date!