Skip to main content
RACELOGIC Support Centre

CAN02 - Updating the Firmware

It is recommended to check the website periodically for updates. To upgrade the CAN02 firmware, download the following from the VBOX automotive website.
 

  1. The CAN02 latest firmware file (.RUF extension file)
  2. Racelogic Upgrader software
     

Connect the RS232 (port 3) of the CAN02 to the PC via the RLCAB001 serial cable and apply power to the CAN02.

Double click on the .RUF upgrade file, which auto runs the Upgrader Software. Ensure the correct COM port is selected in Racelogic Upgrader, then click ‘Upgrade’ to start the procedure.

When this is complete, powering the CAN02 off and back on will complete the process.
 

Note: To confirm which COM port is assigned to the CAN02, check device manager.

Ensure that other software which may try and use the COM port communications, such as VBOX Tools, is closed.

  • Was this article helpful?