Home > VBOX Automotive > Modules and accessories > Thermocouple Interface > TC8V2 - User Manual > 03 - TC8V2 Software Connection

03 - TC8V2 Software Connection

Table of contents
No headers

To configure TC8 using VBOX Setup software the module needs to be powered up and connected to a PC.


To do this, connect TC8 to a powered VBOX using a CAB005 cable. Then use the supplied USB cable to connect TC8 directly to the PC USB port.


Open VBOX Setup and select the COM port the TC8 is connected to from the drop down list:


Once the module has been connected the module code and serial number will be displayed. 


It is possible to confirm if TC8 is connected correctly and which COM is being used by opening Windows Explorer and navigating to Device Manager:

You must to post a comment.
Last modified


This page has no custom tags.


This page has no classifications.
Having trouble finding what you need?