Use the supplied AC charger only. Failure to use supplied charger could lead to risk of explosion or fire. Never leave battery charging unattended.
Before the battery pack is used for the first time, it is important to charge fully for 3 hours:
- Connect the AC charger to mains wall outlet.
- Connect the DC out plug of the AC charger to charge jack on the battery pack.
- Set the ON/OFF switch (underneath battery pack) to the 'ON' position.
Pressing the 'Test' button should cause the battery charge status to be displayed on the LED gauge. If no LEDs are illuminated, the battery requires charging using the supplied AC adapter.
AC Charger LED behaviour
|Green||Battery full charge|