Skip to main content
RACELOGIC Support Centre

CAN to Analogue Module

CAN to Analogue Output Module (RLVBDAC01)

The CAN to analogue output module is designed to convert CAN bus data into voltage and digital output. In this way it is possible to log data from a CAN bus with data logging equipment not incorporating a CAN interface.

Four analogue voltage outputs are available and these can be mapped using the configuration software to output virtually any CAN bus parameter. An example might be throttle position data read from CAN and converted into a 0 to 10 V signal.

The module is also equipped with seven digital outputs, of which four can be set as frequency. 

More information on the DAC01 can be found on our website. 

CAN-Bus-Analogue-Output-Module_DAC01.jpg

 

  • Was this article helpful?