Skip to main content
RACELOGIC Support Centre

01 - Brake Pedal Force Sensor Introduction


The Brake Pedal Force Sensor is designed to measure load applied to the brake, accelerator, and clutch pedals during acceleration, deceleration, and transmission shift events. The units are compact and lightweight, making them easy to install and remove. These sensors also have a high overload protection (150% of FS), which prevents damage to the sensor in the event of a vehicle emergency stop. An anti-slip spherical loading surface minimizes the effects of off-axis loading.

Brake Pedal Force Sensor Installed.png



  • Compact, with a 24.5 mm overall height (27.5 mm when mounted on the pedal mounting bracket).
  • Easy to install and remove.
  • 0.5 – 150 kg (1470.99 N) measurement range.


Description Quantity Product Code
Pedal pressure load cell with internal SGA 1 OL05910
Pedal attachments (top and bottom) 2 MECH0345/346
M8 x 60 mm socket cap head A2 threaded to the head 2 MKX60SKTCAP
M8 x 100 mm socket cap head A2 threaded to the head 2 MKX100SKTCAP
Socket screws 2 M410KH10MCZ
4 Way LEMO to unterminated wire cable (2 m) 1 RLCAB148