Skip to main content
RACELOGIC Support Centre

08 - VBOX Test Suite Test Setup

The Test Setup area is where the user can control and configure the currently selected test. This tab will be displayed when the user clicks anywhere on the map area and will automatically be selected.
 

This tab will be unique to each plugin - so for more information, please see the relevant article for each test.
 

VBTS Test Setup Ribbon Bar 2.png
Accel test example
 

Select a plugin below to view more information or view the Plugin Guide Area.

VBTS General icon.png

CustomTest
Complete a wide range of tests to a set of conditions

VBTS Performance icon.png

Accel Test
Complete acceleration tests

Decel Test
Complete deceleration tests

Lane Change
Complete and analyse various different lane Change tests, such as the ISO 3888-2

VBTS ADAS icon.png

Euro NCAP AEB
Test to the Euro NCAP CCRs, CCRm and CCRb AEB protocols

Park Assist
Validate Park Assist systems to ISO regulation 204/WG14 ISO 16787​

UNR79 CSF (beta)
Complete and analyse a Commanded Steering Function test as described in the UNR79 document

UNR79 Lane Keeping (beta)
Complete and analyse a Lane Keeping Function test as described in the UNR79 document

UNR79 Max Lateral Accel (beta)
Complete and analyse a Maximum Lateral Acceleration test as described in the UNR79 document

VBTS Tyre icon.png

Tyre Traction
Compare the traction forces and wheel slip of different tyres

Lateral Aquaplane
Measure the lateral aquaplane performance of a given tyre based on speed and attained lateral acceleration

Longitudinal Aquaplane
Measure when aquaplaning starts to occur and the percentage of wheel slip during aquaplaning

VBTS Coastdown icon.png

WLTP GTR15 Coastdown
Complete and analyse a coastdown test to the latest WLTP Coastdown protocol

SAE J2263 Coastdown
Complete a coastdown test to the SAE J2263 specification

ABNT 10312 Coastdown
Complete and analyse a coastdown test to the latest ABNT 10312 Coastdown protocol

VBTS Brake icon.png

Brake Trigger
Analyse brake stops from either a brake trigger or from a user defined CAN channel

Brake Speed
Analyse brake stops from a user defined start speed

R78 Motorcycle Brake Force
Analyse motorcycle brake stops from either a brake trigger or from a user defined CAN channel, such as brake pressure or brake position

R139 Brake Assist, Category B (beta)
Carry out a brake assist test in accordance with the R139 regulation

SAE J2909 Brake Force
Complete brake stops that conform to the SAE J2909 specification

VBTS PBN icon.png

EPA (beta)
Carry out a pass-by-noise test in accordance with the EPA regulation

R117 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R117 regulation

R138 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R138 regulation

R41 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R41 regulation

R51 Pass-By Noise
Carry out a pass-by-noise test in accordance with the R51 regulation

 
  • Was this article helpful?