Skip to main content
RACELOGIC Support Centre

VBOX Touch - Updating the Track Database

Occasionally Racelogic will release new versions of the track map database in order to introduce new circuit maps and start/finish lines - and also to update any older tracks with new layouts.
 

The Track Database installed within the VBOX Touch is updated whenever a new firmware file is uploaded on to the unit. However, you can also independently update the Track Database by pressing the Load button within the Lap Timing Settings menu.


The latest database file can be downloaded from the VBOX Automotive Website.

How to Update the Track Database

  1. Download the latest track database file from the link above.
  2. Place the .tdb or .bdb file on the root directory of an SD card (not in the media or any other folder).
  3. Power up the VBOX Touch unit.
  4. Insert the SD card into the Side of the Unit. The SD Card Icon should display as green VBOX Touch SD OK.png as long as the card has free space.
  5. When the unit has booted, select the Mode Button Mode.png and press LAP TIMING if it is not already selected.
     

VBOX Touch Mode Lap Timing2.png
 

  1. Select the Settings Button Settings.pngand press the Track Database Load Button.
     

VBOX Touch Lap Timing Settings Track Database.png
 

  1. The VBOX Touch will start to load the file, which will update the tracks list but not overwrite any existing track information. Progress of the track database update will be displayed via the LEDs; each lit LED will represent 25% of the process with all LEDs extinguishing when the process is complete.
  2. The message 'Database Loaded' should be displayed to confirm it has loaded successfully.
 


To view the latest track list, click on the image below.
 

Track map database.png

  • Was this article helpful?