Skip to main content
RACELOGIC Support Centre

Why is my input module not recognised by the VBOX?


If an input module is not recognised in VBOX Setup by the VBOX:

  • Check that the cable is connected in to the correct socket on the VBOX and on the input module.
  • Check the CAN mode of the input module is set to Racelogic mode (0) and not in a standalone mode.
  • If using a VB3i, check that the RL CAN port is associated with the socket to which you are connecting your modules. This can be checked in the CAN tab within VBOX Tools > VBOX Setup.
  • Was this article helpful?