Skip to main content
RACELOGIC Support Centre

Recording/Replaying Digital Signals With LabSat 3

Recording

  1. Connect the ‘DIGI’ and ‘GRN’ ports of the expansion connector to the appropriate wires/cable.
  2. Power up the LabSat 3 and navigate to the ‘Digital’ section of the menu. Select the 'DIGI' option.
  3. Fit the expansion connector to the LabSat.
  4. Pressing the ‘REC’ button on the front of the LabSat will begin the recording. The LabSat will record all digital signals available.
     

Recording Digital Signals.png

 

Replaying

  1. Connect the ‘DIGO’ and ‘GRN’ ports of the expansion connector to the appropriate wires/cable.
  2. Press the ‘Play’ button on the front of the LabSat to start the scenario replay.
     

Replaying Digital Signals.png
 

If you need any further information about using the LabSat 3 for recording and replaying Digital signals, please get in contact with the Racelogic Support Department.

  • Was this article helpful?